Page 4
FBN Doc #: FBN-0098_03v12p4
1 INTRODUCTION
1.1 Revision
Fastback Networks & Sub10 Systems reserve the right to revise this documentation periodically without any
obligation to provide notification of such revision or changes.
1.2 Intended Users & Software Version
This manual is intended for all installation and service personnel who are involved in the planning, installation,
operation and maintenance of the Liberator-V100 and V1000 equipment.
This Manual refers to Liberator-V100 running Software Version 01.01.01.17, and Liberator-V1000 running Software
Version 02.01.03.12. Please ensure that the software on the radio terminals is the latest version on the Fastback
Networks website:
http://www.fastbacknetworks.com
1.3 Safety Information
1.3.1 Grounding
The V1000 radio terminal (outdoor unit) must be properly grounded to protect against lightning strikes. It is the
user’s responsibility to ensure that the equipment is installed in accordance with national regulations:
USA:
Articles 810 & 830 of the National Electric Code ANSI/NFPA No.70-1984
Other countries may require different regulations.
1.3.2 Power Supply
The Sub10 Systems PoE++ power injector should always be used to power the Liberator-V100 / V1000. The
installer must ensure that a mains voltage supply cable approved for the country of installation is used.
1.3.3 Maintenance and Servicing
•
Always disconnect the primary power source before undertaking maintenance/repair of the radio
terminal (Outdoor Unit).
•
At least once per year, each radio terminal (Outdoor Unit) must be inspected for signs of corrosion.
1.4 Warranty
Sub10 Systems warrants to the original end user (purchaser) that this product is free from any defects in
materials or workmanship for a period of up to 24 months (2 years) from the date of shipment to the end
user.
1.5 Copyright / Disclaimer
Copyright © 2014, 2015 by Fastback Networks / Sub10 Systems.