EN-4
EN
Digital scale
SBS 2507RD / SBS 2507BL / SBS 2507WH
01/2011
Copyright © 2011, Fast ČR, a.s.
USER INSTRUCTIONS
Before fi rst use
1) To ensure precise weighing, place the scale on a fl at and hard surface such as a parquet fl oor, tiles,
linoleum, etc. We do not recommend weighing on carpet.
2) Always take off your shoes before weighing.
3) We recommend checking your weight always at the same time, best in the morning after waking
up. In the morning you eliminate any differences in your weight due to food intake, digestive pro-
cess or physical activities.
4) The measured result may be misleading if weighing is done after intensive exercise, dieting or
during extreme dehydration.
5) Stand still during measuring.
6) If you will not use the scale for a long time, store it in a horizontal position. This position better
protects the sensitive sensors located in the scale footings.
7) Do not place or leave any objects on the scale that may place unnecessary stress on the sensors.
8) Strong electromagnetic fi elds may negatively infl uence the weighing precision. Do not use the
scale in environments with strong magnetic fi elds.
Battery
Remove the battery compartment cover located on the under side of the scale and remove the insula-
tion tape, which prevents the discharge of the battery during transport.
USE
This scale is has a patented function "Auto-on". It is not necessary to tap or to otherwise activate into
the operational mode before weighing. If you wish to fi nd out your weight, simply step on the scale,
which will immediately display your current weight without the need to wait.
Protection against overload
This scale is equipped with a sensor against overload. If any overload occurs, the display will show the
warning symbol ” Err“.
Automatic shut off function
Your scale is equipped with an automatic shut off function. This function will turn the scale off if no
activities are detected within 10 seconds.
Switching between weight units
Your scale is equipped with a weight unit switch, which enables you to display the weight in different
units. If you want to switch between metric (kilograms) and imperial units (pounds or stones), move the
switch on the rear of the scale to the applicable position (kg --> lb --> st). The change in units will be
shown on the display of the scale.
Note
1 lb (pound) = 0,45 kg
1 st (stone) = 6,35 kg
