Fast 9500 Скачать руководство пользователя страница 32

Страница: 32 / 116

SAFETY

SAFETY

Boom Sprayer 9500 / 9600

Page 32

Use additional caution and reduce speed

when towing under adverse surface

conditions, when turning, and when on

inclines. For transport, the weight of the

EMPTY Sprayer must not be more than 1.5

times the weight of the tractor. The minimum

towing tractor weight for the Boom Sprayer is

7600 lbs.

Never tow this implement with a motor

vehicle. Tow only with a properly ballasted

tractor.

EC Compliance Notification

WARNING:

Environmental

transportation hazard. A loaded

machine driven on public roads has a

high risk of tire failure. Do not use the

machine for transporting product(s)

on public roads.

Never transport with a tank filled with water

or chemical(s).

Use a Signal Person

Use a signal person to direct movement of

the tractor / implement combination,

whenever the tractor operator's view is

obstructed.

Designate one individual as THE signal

person. Always have the signal person stand

in clear view. Be sure the signal person stays

a safe distance away from the machine when

it is moving.

Prior to starting the tractor, discuss hand

signals and what each signal means to avoid

misunderstandings and confusion which

could result in a serious injury or fatal

accident for someone.

Keep all bystanders away whenever the

machine is moved.

Use a Safety Chain

A safety chain will help control drawn

equipment should it accidentally separate

from the drawbar.

Using the appropriate adapter parts, attach

the chain to the tractor drawbar support or

other specified anchor location. Provide only

enough slack in the chain to permit turning.

Tow Loads Safely

Stopping distance increases with speed and

weight of towed loads and on slopes. Towed

loads with or without brakes that are too

heavy for the tractor or are towed too fast can

cause loss of control. Consider the total

weight of the equipment and its load.

Содержание 9500





















































































































Результаты поиска

Содержание 9500

Отзывы:

Похожие инструкции для 9500

Бренды по названию

Популярные бренды

Fast 9500, Руководство пользователя

Результаты поиска

Содержание 9500

Отзывы:

Похожие инструкции для 9500

Бренды по названию

Популярные бренды