Page 8
Basic Operation
Humidity Control
NOTE: Due to variations in environmental conditions, it is not always possible
to achieve the desired humidification or dehumidification setpoint.
Press
HUMIDITY
To leave the Humidity Control screens. If no
buttons are pressed, the display will leave the
Humidity Control screens after 30 seconds.
Press the Humidity button
to enter Setup screens.
Pages 18,20
HUMIDITY
Select On to energize
the humidifier system when
humidity drops below the
desired level. Select Off
if no humidification is
desired.
ON
OFF
Adjust the desired
humidification setpoint
(0%-60%)
ON
OFF
Adjust the desired
dehumidification setpoint
(25%-99%)
NOTE:
Each step # is located at
the top right corner of the
display for easy reference.
Press
Press
Press
Press
MODE
MODE
MODE
MODE
NOTE: If Humidity Step #1 is set to ON, you cannot set the Dehumidify setpoint
any lower than the Humidify se 5%. When both Humidity step #’s 1 and
3 are set to ON, the adjustable 5% differential is forced between the Humidify
and Dehumidify setpoints.
Current Room Humidity
45
I
%
OFF
humidify
Select On to energize
the dehumidification
system when humidity
rises above the desired
level. Select Off if no
dehumidification is desired.
Current Room Humidity
Current Room Humidity
Current Room Humidity
2
%
ON
25
humidify
45
3
%
OFF
Dehumidify
45
4
%
ON
Dehumidify
45
25
Step 3 appears if step 17 on page 16 is set to “ON”
Step 4 appears only if step 17 on page 16 is set to “ON”
