MS-600
weighing mode. Calibration is complete!
IX. Troubleshooting
•
Problem:
Scale will not turn on
•
Solution:
Check the batteries
•
Problem:
Displayed weight fluctuates randomly
•
Solution:
Make sure your workspace is stable and
free of any air currents or vibration
•
Problem:
Displayed weight is inaccurate
•
Solution:
Perform a calibration adjustment
X. Error Codes
1. OUTZ
- Zero range has shifted. Perform calibration
adjustment. If the problem persists, the load cell may
be permanently damaged due to overloading.
2. UNST
- Scale is unstable. Use in a more stable
position.
3. HHHHH
- Maximum capacity exceeded. Remove the
extra weight to avoid damaging the load cell.
4. L
- Batteries are low. Replace the batteries.
