FT1068
Instruction Manual
Fast Mover Tools Limited
T: 01582 661993 F: 01582 667100 E: [email protected]
www.fastmovertoolsuk.com
IMPORTANT
Please read through this Manual carefully before using the FT1068.
This tool must only be used for polishing and within the parameters
outlined in this manual. All users of the equipment should be trained in
any risks associated with the products they are polishing or using as
finishing aids.
Specification
Pad Diameter
3”/75mm
Free Speed
2,100RPM
Minimum Pad Speed
2,520RPM
Operating Pressure
90Psi/6.3BAR
Air Consumption
3.5CFM
Air Inlet
1/4” BSP
Vibration Level
2.3m/s (Uncertainty 0.7 m/s)
Noise Level
89dB(A)
Weight
1.6kg
Length
135mm
Safety Instructions
These instructions are intended as a guide to the correct use of this equipment. The process or
materials being polished may have risk characteristics requiring additional safety measures and
these must be identified by the user. All users of this polisher must be thoroughly acquainted with
this manual.
Before Use and Before Using Tool for the First Time
- Make sure you have the relevant Personal Protection Equipment (PPE).
Hand Protection
The pad revolves at high speed and may cause damage if bought into contact with
exposed flesh. The workpiece and the pad may also get hot after prolonged use. Hand
protection must be strong enough to protect the skin and be a good fit and have no loose
parts that may get caught in rotating parts.
Determination of the test results includes consideration of measurement
uncertainty from the test equipment and methods.
Kit Contents
1 x Air Tool
1 x 75mm Backing Pad
2 x 75mm Foam Pad
1 x 75mm Wool Pad
1 x Spanner
Tool Use
This Air Operated Mini Polisher can be used to polish a
large range of painted or varnished surfaces.
FT1068_Product Instructions 21/07/2014 14:39 Page 2
