FMT6900/ST/STD & FMT6910
Instruction Manual
Fast Mover Tools Ltd
T: 01582 661993 F: 01582 667100 E: [email protected]
www.fastmovertoolsuk.com
and not to handle the quartz glass.
6
Reconnect Lamp cable to cassette wiring, taking care to replace the wires in the original
positions.
7
Now replace the end reflectors and grill to complete the assembly.
8
The 4 screws holding the end reflectors must be in place before turning on.
WARNING! Failure to reassemble all the parts and use the guard will invalidate any remaining
guarantee and may make the unit dangerous.
Please do not attempt to carry out any other form of maintenance or electrical adjustments to your
Paint Dryer Machine without first consulting your supplier.
REMEMBER to dispose of the old lamp in accordance with the WEEE Directive (see paragraph
Environmental Protection (W.E.E.E.) below).
User Maintenance Guide
The FMT6900/6910 series should provide years of trouble free service. However, to ensure
maximum benefit from your machine, it should be treated with care, kept dry, cleaned, and
electrically tested on a regular basis. Any worn or damaged parts should be replaced immediately.
To assist we have provided a list of the main spares available to order below.
The reflectors should be kept clean at all times to ensure maximum heat reflection. Dirty reflectors
will reduce the energy transmitted and seriously affect the recommended drying times.
Note:
Spare are available from your distributer. Please quote the following Lamp codes when
requesting spares
Part Ref.
Description
FMT6900
Hand Held Heater (FMT6900ST)
64241077
Lamp - 1kw 220/240V Gold Quartz Lamp (FMT6900/ST/STD)
54241037
Lamp - 1kw 220/240V Ruby Quartz Lamp (FMT6910)
410059
On/Off Switch
410061
Timer Plug
Environmental Protection (W.E.E.E.)
The Waste Electrical & Electronic Equipment Regulations (WEEE) requires that any of our products
showing this marking (left) must not be disposed of with other household or commercial
waste. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate any such product from other waste types and recycle it
responsibly at your local facilities. Check with your Local Authority, Recycling Centre or
retailer for recycling advice.
Timer
(not FMT6900)
Timer Type
0/60 minute
This timer has been designed and developed to assist with any number of small drying processes,
and is ideal for controlling you dryer.
Please note that this controller solely turns the heater off after a user settable time. It won’t control
the temperature so care needs to be taken that the heater is not placed too close to paint work, low
temperature components or anything with a low flammability rating.
