Please keep in a safe place for future reference
Please keep in a safe place for future reference
4. DESCRIPTION
4.1. Packing
The unit is contained within a carton box. All series components are included in same box.
During transport and storage make sure that temperature will be between - 15° and 40°C and for short
period (max 24 hours) +50°C which my cause damages to the gun.
Storage place should be with damp from 30-80%.
4.2. Description
Manual spray gun FMT4765 is employed for high pressure (250bar) painting application and the
pulverization of paints. Micro-atomizers reduce paint-fog and leave coated surfaces smooth and uniform.
This gun is solid and light, perfect for long works without problems.
4.3. Workable products
Employable materials: paints and synthetic enamels, polyurethane, primers, mono-components, double-
layer metalized paints, bi-components, water based paints.
For gun uses with special products it necessary to require approval from producer in order to conform
technical features of machine for processing indicated special products.
FILTERMEDIA SRL is not responsible for injury which might be caused from personnel not trained or
not authorized is not responsible for injury which might be caused from personnel not trained or not
authorized and for using machine for different purposes as indicated.
It remains in any cases forbidden to use the gun for distribution of inflammable products or high toxic
elements like gasoline, herbicides, pesticides.
4.4. Technical data
•
Max Wp: 250bar
•
Fluid Inlet: ¼”, 16x1.5, ½” JIC, 3/8”
•
Filter: Gun filter (standard FM2002, 50M)
•
Weight: 630 gr
4.5. Setting-up
Gun should be powered with a max. pressure of 250bar. For set-up proceed as follow:
•
Lock the trigger
•
Connect fluid hose; use only hose for high pressures
•
Check the filter
•
Check pressures in every parts of the system
•
Ground the spray gun through connection to a properly grounded fluid supply hose and pump
•
Adjust working pressure and check every connection
•
Unlock the trigger, and make sure it closes perfectly when you release it
Painting process must performed in a spray booth with aspiration system. Do not use the unit if aspiration
system doesn’t work.
4.6. Procedure for pressure discharge
When the system is shut down for plant maintenance or at the end of the working process, it is
COMPULSORY to completely discharge the high pressure present in the system. By closing the general
air supply, air is automatically discharged to the motor of pump.
Attention: product flexible hose is still with pressure. Proceed as follow:
•
Lock the trigger
•
Turn off the air supply
•
Unlock the trigger
•
Hold a metal part of the gun firmly to a grounded metal pail. Trigger the gun to relieve pressure.
