5
ASSEMBLY
INSTALLING THE TORSION
SUSPENSION
The Swivelwheel-46 system is shipped to you
unassembled to reduce the freight costs. These
instructions will guide you through the assembly
process. Once you receive the system, remove the
components from the boxes.
1.
Place the Swivelwheel-46 frame with the
plywood decking facing upward on a pair
of sawhorses.
2.
Remove the plywood hatch from the
frame. At the rear of the frame, in the
center, you will find the swivel box for
mounting the torsion suspension.
3.
Remove the lug nuts from the studs on
the swivel mount on the torsion
suspension. There should be a round
silver rotor plate slid over the swivel
mount. Do not remove this plate
4.
With another persons help, lift the torsion
suspension up into the swivel mount plate
on the Swivelwheel-46 frame. Start a
couple of lug nuts on the studs. You may
now release the torsion suspension and it
will stay in place. Install the remaining lug
nuts and tighten. When attached to the
base frame, the assembly should look like
the next drawing. Torque 90-110 lbs.
5.
Remove the lug nuts from the wheel
assembly spindle if not already done so.
Install the wheel and tire to the assembly.
Replace the lug nuts and tighten. Torque
90-110 lbs.
Lug Nuts
Torsion
Suspension Tube
Lug Nuts
