Fast Lane HUMMER, Руководство пользователя

Страница: 3 / 8

Pass the antenna wire through the antenna tube,
then insert the tube into the antenna tube holder.
If the antenna tube cannot be successfully inserted
into the antenna tube holder, try holding the root of
the antenna wire with fingers of one hand and
extending the wire with fingers of the other hand.
1. ATTACHING ANTENNA TUBE
* Note: Be careful not to pull antenna wire too strong.
PREPARATION FOR STARTING OPERATION
2. INSTALLING TRANSMITTER ANTENNA
Place the transmitter antenna into the antenna
holder to screw it in clock-wise.
Do not extend the antenna when installing. It’s
dangerous.
If the antenna is not screwed in securely, the
vehicle may move erratically. Screw the antenna
securely.
Transmitter
antenna
3. INSTALLING THE BATTERIES
TRANSMITTER
To remove the battery lid, press the
point marked “OPEN” and pull the lid
downward.
Install battery make sure that (+) and (-) poles
are positioned properly.
* Dispose the used batteries separately from
other trash.
One 9 volt
(006P) battery
Antenna wire
Antenna tube
Antenna tube holder
3