FAST FORWARD AG | Mansfelder Str. 56 | D - 06108 Halle (Saale)
Page
2
/ 2
4 - EnergyCam 2.0 production defaults
EnergyCam 2.0 Open Wire is configured by default as:
Gas
wM-Bus: disabled
Auto install after EnergyCam boot: enabled
Read decimal: enabled
Reading timer: 15 minutes
Font: White on Black
Modbus, 115200 baud, 8E1
Slave address: 1
5
– Wire assignment
The assignment of the 4-wire cable is as follows:
RED
: 3.3-3.6 VDC /
≥ 100 mA
GREEN
: EnergyCam-RxD TTL
YELLOW
: EnergyCam-TxD TTL
BLACK
: GND
IMPORTANT: There is no polarity protection. Interchanging red and black will damage the device!
6 - Technical support
If you have any problems or questions, please contact us directly:
You can reach us from Monday to Friday between 0900 and 1700 CET
Tel: +49 (0)89-540-40-100
www.fastforward.ag/eng/support
FAST FORWARD AG Ruedesheimer Strasse 11, D-80686 Munich
Electrical and electronic devices may not be disposed of with household waste.
These devices must be returned to designated collection facilities appointed by the government or by the local authorities.
The CE mark is a free trade mark. It does not guarantee any product features.
