9
HD3 Manual, Fast Forward Video, Inc
1.
POWER SWITCH:
Turns the unit on / off. Please allow at least 30 seconds after turning the
unit on for it to boot-up and recognize the disk.
2.
PASS-THRU:
The red LED above the record button will light up indicating that it is in digital
pass-thru mode, which indicates it is record ready. A corresponding message will be dis-
played in the mode indicator area located in the center of the LCD touch-screen panel.
3.
RECORD:
To start recording press and hold the red record button and then press the play
button. A RECORD message and the time code sequence will be displayed in the main
menu screen to indicate the recording process has been initiated and video data is being
recorded onto the storage media.
4.
PLAY:
To PLAY from the beginning, press the “<<” button (notice that in NATIVE mode, it
is instantaneous, no waiting for shuttle back). The time code display will indicate that you
are at 00:00:00:00 and the reference monitor hooked up to the HD3 Deck will jump to the
beginning of the disks recorded video material. Press the play button to view the recorded
video material. In BVW-75, the “<<” will rewind to the beginning of the hard drive at 30X
speed.
5.
STOP:
Terminates both the play and record functions but will not clear the screen. Please
note that when recording long clips wait 30 seconds before selecting another command - to
allow for the clip to close.
6.
CHASE LOCK:
To enable this feature, simply press and hold the PLAY and STOP buttons
simultaneously for 2 seconds and a corresponding message will be displayed in the mode
indicator area located in the center of the LCD touch-screen panel. If feeding time code into
the HD3 Deck, that channel will lock to the incoming time code during playback.
nel X” at the
bottom of the LCD touch screen.
Front Panel Controls