Fast Eddy's FE1000PC, Руководство пользователя

Страница: 5 / 10

Fast Eddy’s Model FE1000PC 5
FAST EDDY’S PELLET COOKER
MODEL FE1000PC
GENERAL INSTRUCTIONS
•
This unit must be electrically grounded in accordance to your local codes, or with
the National Electrical Code ANSI/NFPA 70-1990.
•
Best to plug into a single plug surge protector.
•
Keep the cooker free from combustible materials.
•
Maintain a minimum clearance of 12” from front, back and sides.
•
Never store or use gasoline or other flammable materials in the vicinity of this
cooker or use to ignite fuel for this cooker.
•
Whenever working on, or servicing this unit ALWAYS disconnect the power
first.
•
This cooker is equipped with a 3 prong plug for your protection from a shock
hazard . Always plug this unit directly into a properly grounded 3 prong
receptacle.
•
This unit must be properly vented and in an area where there is sufficient dilution
air to prevent a concentration of carbon monoxide from occurring.
•
Fill the pellet hopper with only approved hardwood barbeque pellets (not heating
pellets). NOTE: Be sure the pellets have not gotten wet. This will cause them to
swell or fall apart and possibly clog the auger. See information in
MAINTENANCE below.
•
Different brands and flavor of cooking pellets will vary in the amount of ash the
cooker will produce. Also they have a variance in the BTU output.
•
Always be sure that the fire diffuser is in place over the fire pot when the power
switch is on.
•
If this is the first time firing of your unit, it will need to be cured. To do this, run
it at least one hour at 400 degrees prior to cooking any meat on it.