Fast & Fluid Management SK550 1.1, Руководство пользователя, Страница: 14 / 24

Operator manual SK550 1.1 V. 2.0
14
3.2.6 Adjust the shake time during operation (optional)
1. Use the program keys to increase (+) or decrease (-) the
shake time.
3.2.7 Remove the can
1. Open the doors (A).
Use the handle (B).
2. Remove the can handle retainer from the can handle.
3. Remove the can.
3.2.8 Stop the operation manually
1. Push the Stop/Up key.
2. Wait until the display shows “READY!”.
The doors are
unlocked.
3. If necessary, remove the can. See
§ 3.2.7
.
3.2.9 Using the emergency stop switch
1. Push the emergency stop switch (A). The machine stops
immediately.
2. Solve the problem as quickly as possible.
3. Reset the emergency stop switch by turning the emergency
stop switch.
4. Press one of the keys to start the machine.
Note
During operation:
- The display shows the remaining shake time.
- You can adjust the shake time.
A
B
A
Note
If the can plate and the can table are too close
to each other, use the Stop/Up key to move up
the can plate, see
§ 3.1.2
.
A
CAUTION
Only push the emergency stop switch in case
of a safety emergency. Do not use the
emergency stop switch as an on/off function!