Fast & Fluid Management Harbil HA180, Руководство по эксплуатации и безопасности

Страница: 17 / 36

Operator manual HA180 V. 2.0
17
3.2.1 General dispensing procedure
For all the software instructions: see the software documentation.
1. Place the can. See
§ 3.2.2
.
2. Move the can table up. See
§ 3.2.3
.
3. Choose the recipe and dispense. See the software
documentation.
4. Move the can table down. See
§ 3.2.4
.
5. Remove the can.
3.2.2 Place the can
1. Place the can (A) at the centre of the mark (B) on the can
table.
3.2.3 Move up the can table
1. Hold the handle (C) and push down the can table switch (A).
Keep the can table switch pushed down.
2. Manually move up the can table (B).
3. Release the can table switch.
The can table locks into
position.
Note
The computer switch only turns the computer on
and off.
A B
A
B
A
B
C
A
C