Fast & Fluid Management GA450, Руководство пользователя

Страница: 16 / 32

16
Operator manual GA450 V. 2.2
3.2.7 Stop the operation manually
1. Push the Stop/Up key.
2. Wait until the can plates are open.
3. If necessary, remove the can. See
§ 3.2.6 .
3.2.8 Adjust the mix speed
1. Push the S-key. The display shows the last-chosen speed.
This is the default mix speed.
2. Push the S-key a number of times to select SP1, SP2, SP3 or
SP4. SP1 is the lowest mix speed, SP4 is the highest mix
speed.
Note
The machine controls the mix speed based on the
size of the can. For some cans it might be
necessary to adjust the mix speed. Contact you
paint supplier.
Note
You can adjust the mix speed when the display
shows ‘rdY’.
Note
If the mix speed that you selected differs from the
standard speed, the machine will remember the
setting until a can of another size is placed on the
can table.
Note
If the mix speed that you selected is too high for the
can height, the machine automatically sets the
speed to SP1, SP2 or SP4 according to the can
height. Refer to the figure below.