Fasel Elektronik FCU6x00 Series, Инструкция по установке и эксплуатации

Страница: 15 / 36

Connection and initial set-up by service technician
Installation and Operating Manual / Version V 1.02 15
3 x beeps: Server connection successfully established. Now you can connect to the
App. This process can take about 5 minutes.
Note: If the 3x beeps are not heard, the Connect Box has not been able to establish
a connection to the server. Check for a stable Internet connection and possible secu-
rity settings on the WLAN router. In this case, start the Connect Box by briefly dis-
connecting it from the power supply and plugging it in again. The Connect Box
should now automatically connect to your WLAN and try to establish a connection to
the server.
6. After you have successfully connected to the server, you can connect to the sauna
via the App.
3.5 Switching off or restarting the Connect Box
The Connect Box is switched on/off by plugging in/unplugging the USB mains adapter.
3.6 Connecting to the "SaunaControl" App
WARNING!
Important access code for your sauna!
Your access code is unique to your sauna control unit and gives you
and others access to your sauna. Please keep it safe and do not pass it
on to third parties. This access cannot be blocked and is intended only
for the owner of the sauna.
For other users, we recommend the sub-user function.
NOTE!
Please note that after a restart or power failure, the Connect Box takes
about 5 minutes to connect to the server and be accessible from the
App.
Only after this period is the Connect Box ready for operation and can be
controlled or accessed using the following method.
To control the sauna, you must connect your App to the sauna control unit.
1. Please check that the sauna control unit is on. In addition, the Connect Box must be
plugged in and connected to the server.
2. Please install the "SaunaControl" App
The App can be downloaded from the official app stores of
Google (Android) and Apple (iOS).
3. Open the "SaunaControl" App on your Smartphone/Tablet.
4. Press "Connect to cloud"
5. Press "Scan QR Code" and scan your QR connection code.
The first time you connect to the main user you will need the access code.