SAFETY WARNINGS
To assure safe operation of your spray system, please read the following carefully.
CAUTION
Grounding Instructions
• Always spray in a well-ventilated area. If a tanning extraction fan is available, place in
the near vicinity of spraying and switch on when system is in use.
• Always keep the spray unit at least its hose length away (6, 8 or 10 feet depending on
hose) from applicator when in use. It’s best to keep the unit as far away as possible when
spraying to ensure that overspray does not get drawn into the motor.
• Always store indoors. Do not allow system to freeze.
• Always use original manufacturer’s replacement parts.
• Never alter or modify any part of this equipment. Doing so can cause an equipment
malfunction and/or bodily injury. Alteration of any equipment part or the system itself
voids the warranty.
• Never attempt to clean any part of the unit or applicator while it is plugged in.
This system was designed for spraying water-based sunless tanning solutions only. Other
materials will not spray properly and could damage the unit and spraying flammable
materials could present a fire or explosion hazard.
Using this system to spray anything
other than tanning solution will void the warranty.
• To reduce the risk of electric shock, do not allow unit to become wet or sit in liquid.
• Keep away from children.
• Never leave spray equipment unattended.
This system must be grounded. This unit is equipped with a cord having a grounding wire
with an appropriate grounding plug. The plug must be plugged into an outlet that is properly
installed and grounded in accordance with all local codes and ordinances. Do not operate
system with damaged cord or plug. Keep away from heated surfaces. Never unplug by
pulling on the cord.
DANGER: Improper installation of the grounding plug can result in the risk of electric
shock.
Check with a qualified electrician or serviceman if you are in doubt as to whether
the product is properly grounded.
Do not use any adapters with this system.
It is not recommended to use extension cords
with this product. It it is an absolute necessity, use only a two-prong plug resembling the
plug on the turbine.
3
