ATTENTION
Clean the hose with a blast of compressed air before connecting the hose to air
tool. This will prevent both moisture and dust within the hose from entering the tool
and causing possible rust or malfunction.
Do not use damaged, frayed or deteriorated air hoses and fitting.
g)
Speed selector.
The tool has a speed selector switch LOW / HIGHT. Set the desired speed before starting the tool.
h)
Press the lever placed on the tool handle to operate tool.
i)
Release the same lever to stop the tool.
j)
When job is complete, turn the air compressor off and store as described in the air compressor operator manual.
ATTENTION
The tool remains for few second after releasing the lever.
k)
Storage.
Avoid storing the tool in a location subject to high humidity. If the tool is left as it is used, the residual misture inside
the tool can cause rust. Before storing and after operation, oil the tool at the air inlet with spindle oil and run it for a short time.
F
G
A
3
3
8/
L
A
IR
D
IE
G
R
IN
D
E
R
