8
7.
TO ASSEMBLE THE UNIT FOR BRAKE BLEEDING
a)
Attach one of the 3’’pipe length to the hand pump and to the reservoir lid
b)
Attach another 3” pipe to the bottom of the cap
c)
Attach the 24” pipe length to the free reservoir lid port
d)
Select an appropriate adapter and attach to the reservoir hose
e)
Attach the adaptor to the bleed nipple
f)
Place a wrench on the brake bleeding fittine, but do not turn
g)
Ensuring that the mode selector is in the “IN” position, pump around 15
-20 times to buid up a vacuum in the pump system
h)
Open the fittine until the fluid starts to enter the reservoir jar
i)
Remove approx. 2oz of fluid and then tighten the fitting
j)
Repeat on remaining wheels