FAS PERLA HP Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 68

background image

PERLA HP - ISSUE 02

37

FAS International S.p.A. - Via Lago di Vico, 60 - 36015 SCHIO (VI) Italy - tel. +39 0445 502011 – fax +39 0445 502010 - e-mail:

[email protected]

Command 59 Stroke counter :

If the command is set at 1, the stroke counter appears every time the machine is switched on.

Command 60 Erases the memory:

When this command is activated all the previous data set by the user are
cancelled.

In response to this command the screen displays

Code 0000.

Enter the figure 6203 then press the ENTER

key to cancel al the data stored in the vending machine's memory. The procedure to cancel the data from
the memory is as follows:

•

Programming

mode, ............................................................................ Command 0 appears on the display

•

Type 60 and press ENTER, ................................................................. Code 0000 appears on the display

•

Type 6203 and press ENTER, .........................................................' ERASING…' appears on the display

The machine then asks the user to enter the parameters relevant to command 50.

Command 61 Reset security/access code:

This command makes it possible to reset the access code used in the EVA_DTS protocol.

Command 62 Enable discount:

The following discount types can be enabled depending on the value set in this parameter:
0 = no type of discount.
1 = discount for different time slots.
2 = discount for purchases with key /credit card (only possible in MDB mode).
3 = discount for time slots and for purchases with key /credit card (only possible in MDB mode).

N.B.

Enter the values of the desired time slots in daily timer 2 in order to enable the application of the

discount.
For machines with the cashless system this command makes it possible to apply different price tables. The
selection of the table to be applied at the time of sale occurs automatically through the communication
protocol between machine and reader (only possible for MDB cashless systems which are provided with this
option).

Command 63 Set the mono/multivend:

If the command is set at 0, the default value, the vending machine operates in monovend mode, and in cash
mode the surplus credit is returned. If this is not possible the sum is added to the amount totalled due to
overpricing. Vice versa, if the command is set at 1, the vending machine operates in multivend mode, and
the amount which exceeds the cost, after the sale, is displayed once again and can be recovered by simply
pressing the coin return button or used for a new selection.
Next the system requests you to set the Maintained Overpay: if the credit is greater than the cost of the
selection, it is maintained for 3 min during which the user can add further credit or, if sufficient, make an
extra selection. Default value 0 = function disabled. Value 1 = function enabled.

«
...
35
36
37
38
39
...
»

Содержание PERLA HP





































































Отзывы:

Нет отзывов

Похожие инструкции для PERLA HP

Бренд: Panasonic Страницы: 256

KXFG2451 - B/W Thermal Transfer

Бренд: Panasonic Страницы: 20

UF 8200 - Panafax - Multifunction

Бренд: Panasonic Страницы: 6

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 150

Бренд: Panasonic Страницы: 112

Бренд: Panasonic Страницы: 12

KX-FL521 - B/W Laser - Fax

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 50

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 84

Бренд: Panasonic Страницы: 104

Бренд: Panasonic Страницы: 24

Бренд: Mitsubishi Страницы: 61

ELECTRIC CUT OFF MACHINE 355 MM

Бренд: ayerbe Страницы: 12

Бренд: SYSFORM Страницы: 28

Бренд: Duerkopp Adler Страницы: 100

Бренд: Janome Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды