FASTER TM T– Issue 00
57
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: [email protected]
E
N
G
L
I
S
H
-
fig. 4
11.3 PROCEDURE FOR REMOVING THE
DRAWERS
To replace the drawer proceed as follows:
•
Switch off the machine by means of the main
switch and pull out the power plug.
•
Open the main door.
•
Remove the electric connector -A- .
•
Pull out the drawer by overcoming the
resistance exerted by the positioning spring
(pull gently).
•
Pull the drawer until it hits the stop, pull it
upwards, rotate it downwards until it is
released from the guide, then finally remove it
from the machine.
To mount a drawer proceed as follows:
•
Insert
the
drawer.
•
Push the drawer until it engages in the locked
position.
•
Insert the electric connector -A-.
•
Close the main door.
•
Energise the machine by means of the main
switch.
11.4 MODIFYING THE DRAWER NUMBER
Vending machines with 6 drawers can be
transformed into machines with 7 drawers by
proceeding as follows:
•
Switch off the machine by means of the main
switch and pull out the power plug.
•
Pull out all the drawers from the vending
machine.
•
Move the guides det. B (the last one on the
bottom is already in the correct position
consequently it does not need to be moved).
To move the guides, open the fastener, ref.
C, and then turn the guide to remove it and
position it at the desired height.
•
Move the connectors, det. A, placed on the
bottom of the cabinet.
•
Add a pair of guides.
•
Mount 7 drawers and check that the
connectors are plugged in correctly.
•
Set the new prices.
fig. 5
fig. 6
