Farsun FG2600 Скачать руководство пользователя

Страница: 67 / 67

FCC Statement

Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the

following two conditions (1)this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation

Содержание FG2600




































































Результаты поиска

Содержание FG2600

Отзывы:

Похожие инструкции для FG2600

Бренды по названию

Популярные бренды

Farsun FG2600, Руководство пользователя

Результаты поиска

Содержание FG2600

Отзывы:

Похожие инструкции для FG2600

Бренды по названию

Популярные бренды