Faroudja FDP-DILA2 Скачать руководство пользователя страница 28

Страница: 28 / 80

Connecting to Various Devices

Connecting to DVI

Before connection, be sure to turn off both the projector and computer devices.

• Read thoroughly the manual that comes with each device.

Note

• Other connections are the same as in the connection example for IBM PC or IBM compatible PCs.

How to attach the ferrite core

Attach the ferrite core when using the S-video cable or infrared remote sensor extension unit which are sold separately.

ony if they are connected directly to the projector.

Release the stopper at each end and
open the ferrite core.

Wind the cord around the ferrite core.

Attach the ferrite core about 3 cm from the end of the
cord.

Close the ferrite core with the cord
inside until you hear it click shut.

Note

• When connecting, connect the terminal which is at the

ferrite core end of the cord to the projector.

Faroudja

Video Processor

DVI (DVI-D 24pin Cable)

Click!

Stoppers

Wind the cable once.

Содержание FDP-DILA2

















































































Результаты поиска

Содержание FDP-DILA2

Отзывы:

Faroudja FDP-DILA2, Инструкция по установке и эксплуатации, Страница: 28 / 80

Результаты поиска

Содержание FDP-DILA2

Отзывы: