FARONICS POWER SAVE MAC, Руководство пользователя

Страница: 27 / 34

27
Adding Targeted Computers to the Task List
In order to run a task, there must be computers targeted to run the task. To add one or more computers
to be targeted to run the task, complete the following steps:
1. In the left column, double-click the task to be targeted to the specified computers.
2. The
Task Edit window appears. At the bottom of the window is a dialog listing the
designated computers assigned to the task. Before a computer is added to the list, it reads No
Computers
.
3. Drag and drop the preferred workstations or group of workstations into the dialog from the
computers in the All Computers list. The number of computers assigned to a specific task
appears at the bottom of the window.
4. Click Save .
The following figure shows the
enable
task set to run:
Each task must be edited to use a Power Save administrator’s user name and password for the target
computer(s). In the above example, admin is the Power Save user name and admin is the Power Save
password. The name and password may already be present in the task, depending on the settings that
were specified in Power Save Assistant.