En
FARO Photon Laser Scanner – User’s Manual
58/68
Revised: April 10, 2008
© 2008 FARO Scanner Production GmbH
9 Cleaning Instructions for optics
ATTENTION:
To avoid unnecessary damage or wear, only clean optics when the
degree of contamination requires cleaning for proper function.
Major contamination and improper handling to clean optics may impact the scanning
quality.
Self-caused damages can result in a complete replacement of the part at
the expense of the customer.
•
We recommend using latex gloves (acetone-proof). People suffering from latex
allergies should use other acetone-proof gloves. Lightly rub the gloves after
taking them off with laboratory cloths and acetone to remove grease and dirt.
•
U
Never
U
touch the optical surfaces with bare hands; if possible, do not touch
with laboratory gloves either.
•
Because of the hazardous materials, acetone and isopropanol, the optics
should be cleaned in a cleaning box with air exhaust, flowbox, or mask.
•
ATTENTION:
Before cleaning the mirror optics, cover the lens with a cap
and avoid any contact with the lens.
•
Even small amounts of acetone on the lens may result in dullness of the
lens surface or cracks in the lens body.
•
In the event acetone accidentally comes in contact with the lens,
IMMEDIATELY rinse with isopropanol or water (distilled, if possible).
What’s needed:
•
Compressed air spray (oil-free - optical supply store)
•
Acetone, isopropanol in spray bottle / dropping bottle
Other types of alcohol (methanol, ethanol) may be used instead of isopropanol
(pharmacy, laboratory supply store, chemical supply store)
•
1 Package lens tissue (optical supply store)
•
1
Package
laboratory
cloths (lint-free)
•
1 Pair of tweezers or forceps
•
1 Pair of
non-powdered
gloves (acetone-proof – latex)
Additionally for a greatly contaminated mirror:
•
Mild neutral soap (optical supply store)
