Faro Freestyle 3D, Быстрый старт, Страница: 3 / 9

We recommend using the tablet computer which is
shipped together with Freestyle
3D
. The SCENE Capture
software is already installed on it.
Before you start capturing, insert the microSD card into
the tablet computer. Your scan project will be saved to
this microSD card.
Tap the SCENE Capture tile to start the software. SCENE
Capture starts with the Home screen by default. Its Pro-
ject Selector presents all the scan projects known at that
time.
Plug the Freestyle
3D
USB cable into a USB3 port on your
computer. The red Status LED will light up. If the speak-
ers of your computer are switched on, you will hear an
acoustic signal as well.
Wait until the SCENE Capture detects Freestyle
3D
. SCENE
Capture will show a loading message. As soon as Free-
style
3D
is ready, the red Status LED light will switch off and
the blue LED will light up.
Keep in mind that the tablet computer (or your
own tablet or notebook computer) may be not
as ruggedized as Freestyle
3D
and may become
damaged under certain environmental conditions.
When scanning outdoors or in dirty surroundings,
protect both Freestyle
3D
and the tablet computer
from liquids and humidity, but also from dust and
dirt which may damage the electronic compo-
nents and the sealings. Temperatures lower than
0°C and higher than +40°C may also influence the
performance of both devices.
!
Starting up Start Software
Home Screen and Project Selector
The software starts with the Project Selector window by default. The Project Selector presents all
the scan projects known to the software at that time.
Toolbar – provides a quick and easy way to access the features with the mouse or, on
tablet computers, by tapping.
Project selection bar – contains the dialogs with the project commands.
Available scan projects – open an existing scan project by double-tapping on its preview
picture.
Project information – If the mouse pointer or, on tablet computers, your finger moves over
one of the available scan projects, more information to this scan project is displayed here.
1
2
3
4
1
2
3
4
SCENE Capture
NOTICE
Every time Freestyle
3D
is detected by SCENE Capture, you will be asked whether to calibrate
the device. In general, you should perform On site calibration as well as the Device White
Balance. Check the Freestyle
3D
User Manual for those two features.
!