manualshive.com logo in svg

Faro ACCSS8031, Руководство по установке

Поделиться
Скачать
Faro ACCSS8031 Скачать руководство пользователя страница 2

2. Position the

Scanner Mount (A)

on the base of the Laser Scanner as shown. Using the provided 4mm

hex key

tighten the four

screws

in a criss-cross pattern as shown. Continue tightening in this pattern until all screws are

snug, do not exceed 1.5Nm (13in-lb).

Set Up the Tripod

1. Extend the legs of the tripod and lock the leg angle clips.

2. Ensure that the tripod is stable, the feet are secure, and the platform is as level as possible.

3. Remove any previously installed adapters or mounting plates.

Attach the Base Plate to the Tripod Platform

1. Verify the mounting stud of the tripod is a 3/8 thread. If the mounting stud is a 5/8 thread, the

Thread Adapter (D)

should be removed from the

Coupling (B)

using the provided 4mm hex key.

2. Place and center the

Base Plate w/Graduated Dial (C)

onto the tripod platform.

https://knowledge.faro.com/Hardware/Focus/Focus/Tripod_Quick_Release_Mount_Installation_for_the_Focus_Laser_Scanner

Updated: Wed, 12 Oct 2022 22:14:00 GMT

2

Содержание ACCSS8031




















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды