5. Check that the scanner and tripod are correctly locked gently lifting up on the bottom of the scanner. If it stays
attached to the tripod the scanner is secure.
6. Check the inclinometer and adjust your tripod to make sure it is secure before you begin your scan project.
Troubleshooting
When attempting the remove the scanner from the tripod, in some instances the entire quick release assembly can
begin to rotate making it impossible to separate the two quick release halves. If this occurs:
1. Continue rotating the outer ring clockwise (to the right) until the scanner and the complete quick release assembly
is free of the tripod.
2. Set the scanner upside down on a sturdy surface. Insert the 3/16 hex key into the
hex socket (A)
of the
base
plate (B)
. While firmly holding the knurled
outer ring of the mount plate (C)
, rotate the 3/16 hex key in a counter-
clockwise direction to separate the base plate from the mount plate.
Updated: Tue, 09 Nov 2021 02:45:07 GMT
7
