FarmTek Polaris Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 34

FarmTek Polaris Скачать руководство пользователя страница 24

©

FarmTek, Inc.

Timer Operation

CUTTING (2)

1) The timer automatically begins counting down

from the time limit when the rider breaks the elec-
tric eye beam or the START/STOP button is
pressed. (Note: The electric eyes only start the
timer, they

will not stop

the timer).

2) When time expires, the horn is sounded and the

timer automatically stops. At this time, a score can
be entered (see

Entering a Score

below).

If the electric eyes are used, they are disabled when-
ever the timer stops. This allows arena preparation
between riders without starting the timer. A flashing

Off

message is displayed over the electric eye status

to remind the operator that the eyes are disabled.

After the arena is cleared for the next rider, press the
EYES ON button to re-enable the electric eyes.

Entering a Score

Press the SCORE/PENALTY button. Then, key in
the score, followed by the ENTER key. Pressing the
decimal point button moves the input cursor to the
right of the decimal. However, zeros to the right of
the decimal

do not

need to be entered.

After the score is entered, it is shown on the main
time display, on the scoreboard, and on the printer (if
connected). The score remains on the display and
scoreboard until time starts for the next rider.

Correcting Mistakes

If a mistake is made while entering the score, press

and hold down

the CLEAR TIME button until the

timer beeps and the score value is cleared.

If ENTER has already been pressed, simply start the
score entry process over – the new score replaces the
previous score.

Useful Features

Accidental Timer Stop

If the timer is accidentally stopped during a run,

the

rider can still be accurately timed

by pressing the

RESTART button. As long as RESTART is pressed
before time expires, timing is resumed without any
loss of time.

Previous Time/Score Recall

Use the PREV and NEXT keys to scan back and forth
through previous times and scores. The previous time
display is removed after ten seconds, or by

pressing any other key. You may view a previous
score even while the timer is running.

Skipping a Rider / No Score

Pressing the NO TIME button prints "-- No Score --"
on the optional printer. This ensures a line is present
on the printer for each contestant registered to ride. If
a score is not entered for a rider, the printer

automati-

cally

prints "--No Score--" for the rider when the

timer starts for the next contestant.

«
...
22
23
24
25
26
...
»

Содержание Polaris



































Отзывы:

Нет отзывов