19
GROWSPAN
™
GOTHIC PRO GREENHOUSES AND SYSTEMS
Revision date: 06.06.18 113836_37_38_39
INSTALL END WALL FRAMING (BACK)
Greenhouse end walls (front and back) are identical except
as noted below and on end frame diagrams.
If back wall includes optional double door kit (additional
purchase required), repeat End Wall Installation procedure
and install framing for remaining end wall.
If back wall
does not
include an optional double door kit,
consult the end frame diagram
to install the vertical frame
tubes in the framed door opening.
Dashed lines show where additional frame tubes are
installed when the optional double door is not present.
Consult the end frame diagram for additional information.
1. Read note regarding installation of optional accessories
at the beginning of the end wall installation section.
2. Cut tubes to required length and attach to end wall
framing.
3. Install frame tubes as previous described.
TAPE SHARP EDGES AND CONNECTORS
After frame is assembled, check for sharp edges that could
damage cover or end panel. File these smooth or tape over
them using the supplied duct tape.
In addition, return to all rafters and apply tape over
each connector to better protect the cover film when it is
installed. The following photo shows one way to apply tape.
Rafter and frame shown above may differ from actual
frame. Photo is used to illustrate tape application.
Duct tape
over connector
