DISPLAY UNITS
2
Revision date: 09.04.12
YOU MUST READ THIS DOCUMENT BEFORE YOU
BEGIN TO ASSEMBLE THE DISPLAY BENCH
.
Thank you for purchasing this Display Bench. When
properly assembled and maintained, this product will
provide years of reliable service. These instructions include
helpful hints and important information needed to safely
assemble and properly maintain the bench. Please read
these instructions
before
you begin.
If you have any questions during the assembly, contact
Customer Service for assistance.
SAFETY PRECAUTIONS
• Periodically check nuts and bolts to verify they are tight
and secure.
• Do not use the Display Bench if any part is broken or
damaged.
• Do not stand on Display Bench shelves. This Display
Bench is not a ladder.
• Always lock the brakes on all four (4) wheels when the
Display Bench is not being moved.
• Do not use on inclines; Display Bench may tip or roll
away.
• Do not hang more than six (6), 10" hanging baskets of
flowers on the purlin.
• Do not load shelves with more than 200 lbs. each.
REQUIRED TOOLS
The following list identifies the main tools needed to
assemble the bench.
• Flat Head Screwdriver
• 10mm Wrench
UNPACK AND IDENTIFY PARTS
The following steps will ensure that you have all the
necessary parts before you begin to assemble the bench.
1. Unpack the contents of the shipment and place where
you can easily inventory the parts.
2. If anything is missing or you have questions, consult
the Pictorial Parts List, or contact Customer Service.
NOTE:
At this time, you do not need to open the plastic
bag containing smaller parts such as fasteners or
washers.
