CLEARVIEW
™
PANELS
Visit
www.ClearSpan.com
for additional products and customer assistance.
REQUIRED TOOLS
The following list identifies the main tools needed to
assemble the panel. Additional tools and supports may be
needed depending on the location, and
application.
Tape measure or measuring device
Variable speed drill
Drill bits
3/8'' Nut Setter or 3/8'' socket
Scissors
Gloves
Metal file
Metal-cutting saw
Duct tape
Box cutter or utility knife
Ladders, work platforms, and other machinery for lifting
designed to work safely at the height of the panel.
UNPACK AND IDENTIFY PARTS
The following steps will ensure that you have all the
necessary parts before you begin.
Unpack the contents of the shipment and place where
you can easily inventory the parts. Refer to the Bill of
Materials/Spec Sheets.
Verify that all parts listed on the Bill of Materials/Spec
Sheets are present. If anything is missing or you have
questions, consult the Pictorial Parts Guide and all
shelter diagrams for clarification, or contact Customer
Service.
NOTE:
At this time, you do not need to open the plastic
bags containing smaller parts such as fasteners or
washers.
•
•
•
•
•
•
•
•
•
•
•
1.
2.
