OI-SH750EH-EN
11
When handling material on a slope, always approach the material with the power
unit facing uphill.
Only use a power unit equipped with a ROPS cab or rollover protective structure.
When stacking material, ALWAYS MAKE SURE MATERIAL IS PLACED SO THE STACK
IS STABLE.
Keep all bystanders at a safe distance. REMEMBER FALLING ITEMS CAN ROLL OR
TUMBLE.
Do not handle loads that exceed the weight limitations of the loader.
Carry the loads slowly and as low as possible to the ground. Avoid excessive speed
during operation.
For operator safety, always keep load in front of power unit. NEVER position load
back over operator. ALWAYS BE CAREFUL!
Beware of lift clearance when raising loader to maximum height.
Keep alert and watch the rear as well as the front when working with the loader.
Operate loader from operator’s seat only. Remain at controls until operating cycle
is complete.
Use extreme care when working on inclines and hillsides.
Do not operate close to ditches, creeks or holes slow down when operating over
rough ground.
Содержание SH-750EH
Страница 1: ......
