
28
W35R
3.
Tighten the nuts.
4.
Check that the chain tightener runs on the rollers.
5.
NOTE! Do not over tighten the chain.
Fig. 17.
Tightening the roller chain
ADJUSTING THE DRUM BRAKE
Adjust the drum brake so that it slows down the drum slightly while pulling out the rope. This will reduce risk of
tangling and backlash.
1.
To increase the braking effect tighten the adjustment bolt. See fig 18. To decrease the braking effect loosen the
adjustment bolt.
Fig. 18.
Drum brake adjustment
REMOVING THE WINCH MECHANISM
The whole winch mechanism can be removed in one piece from the frame. To remove the winch mechanism from
the winch (e.g. in order to change the roller chain) follow the instructions below:
1.
Park the winch on a level, stable ground so that it leans a little backwards.
2.
Remove the cable.
3.
Remove the fastening bolts (fig. 19 pos. B) beside the drive shaft. Socket size 24 mm (15/16”).
Содержание W35R
