Farmi Forest Corporation CR46 Скачать руководство пользователя страница 4

Страница: 4 / 52

CR46

WARNING SYMBOLS IN THIS MANUAL

• imminent danger which could cause serious personal injury or death

• danger which could cause personal injury

• conditions or misuse that could damage equipment or machinery

• reminders, such as for performing checks or carrying out maintenance

or repair procedures

INTRODUCTION

This manual includes the information and maintenance instructions required for operating the machine in the

optimal manner.

Although you have experience in using this kind of machinery, read the operation and maintenance instructions

carefully since they include information enabling efficient and safe operation. Regular maintenance is the best

way to guarantee the efficient and economical performance of the machine.

Each and every operator must read, understand, and follow all safety instructions

and procedures.

CUSTOMER FEEDBACK

We are happy to receive your opinions and suggestions for improvements by mail, fax or e-mail.

All implemented suggestions for improvements will be rewarded.

WARNING!

CAUTION!

DANGER!

CAUTION!

PRODUCT WARRANTY

Farmi provides a 12-months warranty on all Farmi products.

after the receipt of the product to get full product warranty and additional information on your product. If it

is not possible for you to register via internet, please register as follows: Complete the registration form on the

last pages of this manual and return it to us within 30 days after the receipt of the product.

Содержание CR46





















































Результаты поиска

Содержание CR46

Отзывы:

Похожие инструкции для CR46

Бренды по названию

Популярные бренды

Farmi Forest Corporation CR46, Руководство по эксплуатации, техническому обслуживанию и запасным частям

Результаты поиска

Содержание CR46

Отзывы:

Похожие инструкции для CR46

Бренды по названию

Популярные бренды