Farmi Forest Corporation 4670, Руководство по эксплуатации, техническому обслуживанию и запасным частям

Страница: 20 / 52

FARMI 4670
20
LUBRICATION
Using the appropriate hydraulic oils and lubricants is
essential for the trouble-free operation of the machine.
CHANGING THE OIL
Change the oil according to the vehicle’s maintenance
recommendations.
The crane has been filled with ISO VG46S oil at the fac-
tory.
If the oil temperature does not exceed 70
o
C in the sum-
mer, winter oil can be used all year round.
When changing oil, make sure that the oil grade being
used is compatible with the system and any oil remai-
ning in it.
HYDRAULIC OIL REQUIREMENTS
The freezing point must be below -50
o
C.
The viscosity must not be lower than 1.5 E
o
, +50
o
C for
piston pumps and 2.5 E
o
, + 50
o
C for gear pumps.
The hydraulic oil must contain the necessary additives
for lubrication, rust protection, and defoaming.
Hydraulic oils intended for use in tractors are usually
also suitable for use in hydraulic cranes.
OIL MAKE HYDRAULIC SYSTEM GREASE NIPPLES
-10
o
C ...+30
o
C -25
o
C...-10
o
C
BP ENERGOL SHF 46 ENERGOL SHF 32,22 ENERGREASE LS-EP2, L21M
ESSO UNIVIS N46 UNIVIS N 32,22 BEACON EP2,
MULTIPURPOSE GR MOLY
MOBIL
DTE 16 DTE 15,13 MOBILUX EP 2
MOBIL GREASE MP, SPECIAL
SHELL
TELLUS OIL T46 TELLUS OIL T32,22 ALVANIA EP GREASE 2
TEBOIL HYDRAULIC OIL 46 HYDRAULIC OIL 32, 33 SOLID 2/ summer, SOLID 0/ winter
UNION / TEXACO
RANDO OIL HDZ 46 RANDO OIL HDZ 32,
HYDRAULIC OIL HD 5W
MARFAK MULTI PURPOSE 2,
MOLYTEX GREASE 2
Lubricating point Qty Action Interval Notes
Slewing device
Bearings 3 Greasing 50 h
Racks 2 Greasing 50 h
Booms
Articulation 6 Greasing 10 h
Cylinder ends 6 Greasing 10 h
Extensions surfaces 2 Lubrication 10 h Apply grease to surfaces.
Grapple
Articulation 6 Greasing 10 h
Cylinder ends 2 Greasing 10 h
Support legs
Articulation 2 Greasing 10 h
Cylinder ends 4 Greasing 10 h
OIL AND LUBRICANT GRADE TABLE
LUBRICANTING POINTS TABLE