Manual
TURBULENT 3 | TURBULENT 5 | TURBULENT 6
9
│
27
1.
DESCRIPTION:
The
TURBULENT 3
machine is designed as semi-carried, the
TURBULENT 5; 6
machine is designed as
folding semi-carried. The basic design consists of the tow bar, on which there is the TPS suspension bar with
rotary pivots
36 mm or
60 mm for categories TPS 3 and KIROVEC, furthermore of the middle frame with
the transport axle and
TURBULENT 5; 6
of two side frames with copying wheels. On the middle and side
frames, there are the working shares and a row of angle discs. The
TURBULENT
machine has as the last working
body a couple of tyre crumbling rollers, which simultaneously compact the cultivated soil (Fig. 2).
MACHINE WORKING PARTS
Fig. 2 - Machine working parts
1.1.1
Tow bar with folding standing foot
1.1.2
Copying wheels of side frames (Turbulent 5; 6)
1.1.3
Sections of shares in 4 rows;
FARMET
screwed shares
1.1.4
Sections of angle discs
1.1.5
Tyre roller including transport axle
1.1.6
Additional tyre roller
HYDRAULICS
Hydraulic diagram of Turbulent 3
Hydraulic diagram of Turbulent 5; 6
1.
Control distributor (tractor)
2.
Hydraulic coupling
3.
Hydraulic cylinder (axle)
4.
Closing cock
5.
Hydraulic closing valve (Turbulent 5; 6)
6.
Hydraulic cylinder (Turbulent 5; 6 – folding of side frames)
Parts of the hydraulic system of the machine, which are under pressure, are forbidden to disassemble.
Hydraulic oil that penetrates the skin under high pressure causes severe injuries. In case of injury, seek a
physician immediately.
Tow bar with
suspension bar
Middle frame with
transport axle
Side frames with
copying wheels
1.1.1
1.1.3
1.1.4
1.1.5
1.1.2
1.1.6
