Manual
TURBULENT 3 | TURBULENT 5 | TURBULENT 6
12
│
27
RED
DUST CAP - circuit Dn10 for axle lifting piston rod ejecting
YELLOW
DUST CAP - circuit Dn10 for axle lifting piston rod inserting
WHITE
DUST CAP - circuit Dn10 for unfolding the side frames into the
working position
BLUE
DUST CAP - circuit Dn10 for folding the side frames into the transport
position
BLACK, GREEN
DUST CAP - hydraulic control of the disc
height setting
Release the spherical valve securing the transport position of the axle against unfolding of the side frames,
release the spherical valves from the
CLOSED
position (Fig. 3) into the
OPEN
position (Fig. 4).
Fig. 3 – Spherical valve
CLOSED
position
Fig. 4 – Spherical valve
OPEN
position
In order to prevent accidental or foreign person (children, passengers) caused movement of the
hydraulics, the control switchboards on the tractor must be secured or blocked in the transport
position.
3.3.
FOLDING AND UNFOLDING OF THE MACHINE - TURBULENT 5; 6
With all hydraulic movements, lower the speed of the moving parts of the machine before
stopping by throttling the corresponding valve at the control unit!
The hydraulics for the folding and unfolding must be connected to the double-action control unit.
The operator must ensure that during folding and unfolding of the side frames, no person or animal is
within their reach (i.e. at the place of their impact) or vicinity and that no one puts his fingers into the joint
space.
Perform folding and unfolding on flat and solid surfaces or laterally to the slope with the fully open
control unit.
Only perform folding or unfolding with a machine that is lifted on the axle.
Remove stuck soil from folding points, soil may impair function and cause damage to the mechanics.
During folding or unfolding, check the side frames and have them continuously fold into the end position
to the stoppers.
