Manual
TRITON 300 P
34
│ 36
10.
MACHINE LUBRICATION SCHEDULE
During machine maintenance and its lubrication, it is necessary to observe the safety regulations.
LUBRICATION POINT
INTERVAL
LUBRICANT
TOW BAR JOINT
•
Once a week
•
Always before the work with the
machine
•
Always after the end of the season
and before storing the machine
Grease class NGLI 2 with EP
additives
TOWING LOOP
•
Once a week
•
Always before the work with the
machine
•
Always after the end of the season
and before storing the machine
Grease class NGLI 2 with EP
additives
AXLE PINS
•
Once a week
•
Always before the work with the
machine
•
Always after the end of the season
and before storing the machine
Grease class NGLI 2 with EP
additives
•
Points of lubrication are marked:
•
When it is difficult to apply the grease into the point of lubrication despite pressing the grease gun
lever strenuously, try turning the joint while pressing the grease gun lever.
