Manual
KOMPAKTOMAT K500PS | K600PS | K700PS | K800PS | K1000PS
37
│
56
7.5
ADJUSTING THE LEVELLER HEIGHT BEHIND SHARES
Perform the adjustment of the levellers when the machine is unfolded in the working position and
standing still.
The machine must rest on the working sections.
When adjusting the position of the levellers, always observe generally valid labour safety regulations.
o
The leveller behind the shares is used for even spreading of the loosened soil behind the last
row of sweeps in front of the rear roller.
o
Set the height of the leveller “V” according to the current soil conditions.
o
Correct position of the leveller affects the resulting quality of processing.
o
The correctly set leveller ensures that no tracks after the last row of shares are visible.
o
The position of the leveller is secured by inserting a chain loop into the hole on the supporting
frame. The chain is secured by inserting a companion part and a safety pin.
7.6
SETTING THE FINISHING SECTION FEATURES
7.6.1
SETTING THE ANGLE OF THE REAR LEVELLER
When installing the leveller stops, always observe generally valid labour safety regulations.
Correct function of the leveller affects the resulting quality of processing.
The angle of the finishing bar does not have to be
changed in lighter soils or in deep cultivation when
Kompaktomat creates enough loosened soil. It means
that the backstops do not need to be used
.
V
