Farmet KOMPAKTOMAT K1000PS, Руководство по эксплуатации

Страница: 19 / 56

Manual
KOMPAKTOMAT K500PS | K600PS | K700PS | K800PS | K1000PS
19
│
56
4. MACHINE ASSEMBLY AT THE CUSTOMER

Always assemble the machine on a flat and reinforced surface.
 Use the Spare Parts Catalogue with 3D views as reference for assembly.
 The operator must perform the assembly according to the instructions of the producer, best in
cooperation with the expert servicing technician determined by the producer.
 The operator must secure a functional test of all assembled parts after the completion of the machine
assembly.

The operator must secure that the handling of the machine using lifting equipment during its assembly is
in accordance with chapter „C“/p.9.
 Example of a loaded machine, K800PS, on the truck platform
 Unloading the K800PS machine from the truck platform using a forklift truck
5. COMMISSIONING
 Before taking over the machine, test and check, whether damage occurred during transport and
whether all parts contained in the bill of delivery were supplied.
 Before commissioning the machine, carefully read this operating manual, especially Chapters A-D page
7-14. Before the first use of the machine, familiarise yourselves with its controls and overall function.
 During work with the machine, observe not only the instructions of this operating manual but also
generally valid regulations of work safety, health protection, fire and transport safety, and
environmental protection.