Manual
FANTOM CLASSIC FX 650 PS | FX 850 PS
13
│ 48
1.1.5
Central frame
Boční rámy
1.1.1
1.1.4
1.1.3
1.1.7
Side frame
1.1.2
1.1.6
1.
DESCRIPTION
The
FANTOM FX 650-850 PS
machine is constructed as semi-carried.
The basic version consists
of a tractive pole with a TPS suspension bar with
36 mm or
60 mm pivots for the TPS 3 and KIROVEC category,
or a loop for bottom hitch
(
51 mm,
71 mm
or K80 hitch),
a central frame with the transportation axle and
four side frames.
There are four rows of working shares located on the central and side frames
and tracing
wheels on the side frames. Furthermore, there are rollers in the rear of the machine that compact the loosened
soil. In front of the first row, it is possible to mount front tools upon request, i.e. a crossboard, a cutting roller,
or coulters. Behind the rear roller in the middle part, the machine axle is located.
1.1.
WORK PARTS OF THE MACHINE
Fig. 2 – Work Parts of the Machine
1.1.1
Tractive pole with a folding leg
1.1.2
Supporting wheel
1.1.3
Front tools
1.1.4
Four rows of shares
1.1.5
Rear levelling discs or levellers
1.1.6
Roller
1.1.7
Transportation axle
1.2.
HYDRAULICS
Parts of the hydraulic system of the machine, which are under pressure, are forbidden to disassemble.
Hydraulic oil that penetrates the skin under high pressure causes severe injuries. In case of injury, seek a
physician immediately.
