Farmers Friend Caterpillar Tunnel, Сборка и инструкция по эксплуатации

Страница: 5 / 15

A
B
C
D
Well-designed, quality tools and equipment | farmers friend llc .com
CLASSIC CLASSIC PRO GOTHIC GOTHIC PRO UPGRADE
1.
Find level surface to assemble bows. ** Note: If you are
assembling a Gothic Pro Tunnel with cross bracing, it is
easiest to attach the bracing at this point. See page 8
for instructions.
2.
Connect each bow section with one self-tapping screw
in the side of each bow joint. Three sections form one
complete bow.
3.
Slide side curtain hooks onto bottom of bow with eyelets
facing down.
**
All bow sections are swaged on one end. This allows for univer-
sal interchangeability. See Figure 5
tools needed
•
Drill or Impact Driver
•
5/16" Driver Bit
materials included
A Side Curtain Hooks
B Self-Tapping Screws
C Classic Bow Sections
D Gothic Center Bow Sections *
*
Only included in Gothic Tunnels
B O W A S S E M B LY
Classic & Gothic
Watch the video!
Scan the code or viSit:
fflc.us/bow-assembly/v
Step 1
Step 2.2
Step 2.1
Step 3
Figure 5: complete bow aSSembly
Swaged ends
Non-swaged ends
Classic Bow
Gothic Bow
Grey lines represent bows. Colored circles indicate placement of side curtain hook.
Recommended Side Curtain Hook Placement Recommended Side Curtain Hook Placement
100-Ft tunnel with 4-Ft bow Spacing 100-Ft tunnel with 4-Ft bow Spacing
100-Ft tunnel with 5-Ft bow Spacing 100-Ft tunnel with 5-Ft bow Spacing
50-Ft tunnel with 4-Ft bow Spacing 50-Ft tunnel with 4-Ft bow Spacing 50-Ft tunnel with 5-Ft bow Spacing 50-Ft tunnel with 5-Ft bow Spacing
6 7