FARMALABOR TOP BLISTER, Руководство по эксплуатации и обслуживанию

Страница: 34 / 44

ENGLISH
13

When the SET temperature is reached, the device is ready to weld the blisters.
The temperature of the heating plate "t" can have an oscillation of 10 ° from the SET value from
the set temperature.
5.2.3 WELDING BLISTER

Fill the pre-welded blister with the capsules or tablets to be sealed;

Insert the pre-sealed blister in the blister holder plate;

Insert the blister holder plate in the blister holder slide;
Warning: The blister opening must be facing as shown in Fig. 7.
Fig. 6: SET temperaure reached
Fig. 7: Towards blister insertion