Farm King BW150 Скачать руководство пользователя страница 29

Страница: 29 / 74

Operation - BW150

WRAPPER OPERATION

Installing Film

NOTE: With each revolution of the rotating frame, the

bale and film rotate by a certain angle around
the horizontal axis, which causes the
consecutive layers of film to be wrapped
tightly around the bale.

Figure 8

NOTE: When installing the roll of film, place its

internal, sticky side towards the bale axis.

Route the film (Item 1) over roller pin (Item 2) and under
roller pin (Item 3)

[Figure 8]

Figure 9

Move the support (Item 1) away from the metal rollers
and secure it by using the hook (Item 2)

[Figure 9]

attached to the wrapping assembly.

Turn lever (Item 3)

[Figure 9]

counterclockwise until

there is adequate space to install the film roll.

Adjust the height of the lower pin (Item 4)

[Figure 9]

position appropriate for the desired film roll width (500
mm or 750 mm).

Place the film roll (Item 5) on the lower conic pin (Item 6)

[Figure 9]

Turn lever (Item 3)

[Figure 9]

clockwise until the roll is

securely held in the vertical position.

Prevent the film roll from unscrewing by tightening the nut
(Item 7)

[Figure 9]

on the crank screw.

Pull the film through the rollers as shown on the diagram

[Figure 8]

NOTE: Pull the end of the film so that it may be easily

handled in the machine.

ENTANGLEMENT HAZARD

•

Clear the work area of all bystanders, especially
small children and animals.

•

Disconnect hydraulic hose before working on
the machine.

•

Keep shields and all guards in place.

•

Keep away from moving parts.

BW-008

FILM ROUTING DIAGRAM

BW-009

Содержание BW150











































































Результаты поиска

Содержание BW150

Отзывы:

Бренды по названию

Популярные бренды

Farm King BW150, Руководство оператора и каталог запасных частей

Результаты поиска

Содержание BW150

Отзывы:

Бренды по названию

Популярные бренды