background image

28

Warranty Policy - 9620 Snowblower

Buhler Trading Inc. products are warranted for a period of twelve (12) months (90 days for 
commercial application) from original date of purchase, by original purchaser, to be free 
from defects in material and workmanship under correct, normal agricultural use and proper 
applications.

Buhler Trading Inc.’s obligations under this warranty shall be limited to the repair or exchange, 
at Buhler Trading Inc.’s option, of any Buhler Trading Inc. product or part which proves to be 
defective as provided. Buhler Trading Inc. reserves the right to either inspect the product at the 
buyer’s location or have it returned to the factory for inspection.

The above warranty does not extend to goods damaged or subject to accident, abuse or misuse 
after shipment from Buhler Trading Inc.’s factory, nor to goods altered or repaired by anyone 
other than an authorized Buhler Trading Inc. representative.

Buhler Trading Inc. makes no Express Warranties other than those, which are specifically 
described. Any description of goods, including any references and specifications in catalogues, 
circulars and other written material published, is for the sole purpose of identifying goods and 
shall conform to such descriptions. Any sample or model is for illustrative purposes only and 
does not create an Express Warranty that the goods conform to sample or model shown.

The purchaser is solely responsible for determining suitability of goods sold. This warranty is 
expressly in lieu of all other warranties expressed or implied. Buhler Trading Inc. will in no event 
be liable for any incidental or consequential damages whatsoever. Nor for any sum in excess of 
the price received for the goods for which liability is claimed.

Warranty Claims
Warranty requests must be prepared on Buhler Trading Inc. Warranty Claim Forms with all 
requested information properly completed. Warranty Claims must be submitted within a thirty 
(30) day period from date of failure repair.

Warranty Labor
Any labor subject to warranty must be authorized by Buhler Trading Inc. The labor rate for 
replacing defective parts, where applicable, will be credited at 100% of the dealer’s posted shop 
rate.

Government Legislation
Warranty terms and conditions are subject to Provincial or State legislation.

Important Facts
Snowblower Fan Shafts Carry No Warranty

IMPORTANT NOTE: This warranty does not apply to rentals

Warranty Policy

Содержание ALLIED 9620































Отзывы: