Farm King Allied 80 Series, Руководство оператора и каталог запасных частей

Страница: 28 / 62

Operation - 80 Series Rear Blade
26
ENTERING AND LEAVING THE
OPERATOR’S POSITION
IMPORTANT
Follow the instructions in your tractor’s operation
manual for the correct procedure.
Entering The Operator’s Position
Move to the operator’s position, start the engine
and release the parking brake.
Leaving The Operator’s Position
WARNING
AVOID INJURY OR DEATH
Before you leave the operator’s position:
• Always park on a flat level surface.
• Place all controls in NEUTRAL.
• Engage the park brake.
• Stop the engine and remove the key.
Park the tractor / equipment on a flat level surface.
Place all controls in neutral, engage the park
brake, stop the engine and wait for all moving
parts to stop. Leave the operator’s position.
CONNECTING TO TRACTOR
Always inspect the tractor’s three point hitch and
equipment three point mounts before connecting
(see the tractor’s owner’s manual).
Move the tractor drawbar into the storage position
or remove (if necessary) to prevent interference
with operation (see the tractor’s operator’s manual
for the correct procedure).
Remove the retaining pins from the equipment
three point mounts.
Enter the operator’s position.
Move the tractor into position in front of the
equipment.
WARNING
AVOID INJURY OR DEATH
Before moving the tractor, look in all directions
and make sure no bystanders, especially small
children are in the work area. Do not allow anyone
between the tractor and the equipment when
backing up to the equipment for connecting.
Keep fingers and hands out of pinch points when
connecting and disconnecting equipment.
Move the tractor backwards, aligning the tractor
and equipment three point mounts.
Leave the operator’s position.
Connect tractor and equipment three point
mounts. Attach securely using retaining pins.
IMPORTANT
Always use implement mounting pins of
adequate size and strength and a retaining pin
with a locking device.