Farm King Allied 6025, Руководство оператора и каталог запасных частей

Страница: 26 / 82

Assembly - Hydraulic Series
22
Figure 6
Align the spout (Item 1) on top of the spout ring
and within the spout retainer components (Item 2)
[Figure 6].
The spout opening must face the same direction as
the snowblower intake.
Figure 7
Assemble and attach the right hand spout retainer
components (Item 1) to the spout ring, securing
the spout to the snowblower frame.
Ensure spout rotates freely.
Spout
Figure 5
Align the spout ring (Item 1) on the snowblower
frame mount [Figure 5].
Assemble the left hand spout retainer components.
Align the spacer (Item 4), two bushings (Item 5),
and clamp (Item 6) on the left hand set of holes of
the spout ring [Figure 5].
Attach the spout retainer components through the
bottom of middle hole with a 1/2” x 2” hex bolt
(Item 2), 1/2” washer, and 1/2” lock nut (Item 8)
[Figure 5].
Attach each of the other two holes of the assembly
with a 3/8” x 2” hex bolt (Item 3), 3/8” washer, and
3/8” lock nut (Item 7) [Figure 5].
IMPORTANT
Bolts must be threaded upwards with the nuts and
washers on top.
1
3
3
2
4
5
6
7
8
1
2
1