Farm King 1370 Скачать руководство пользователя страница 53

Страница: 53 / 146

Maintenance - 1370, 1385, 1395, 13114 Backsaver Auger

AXLES

Wheel Lug Nut Torque

Check the torque on wheel lug nuts daily. Tighten
lug nuts to 120 ft.-lbs. (162 N•m) torque.

Tire / Wheel Replacement

Empty the Backsaver Auger (if required).

WARNING

AVOID INJURY OR DEATH

Before you leave the operator’s position:

•

Always park on a flat level surface.

•

Place all controls in NEUTRAL.

•

Engage the park brake.

•

Stop the engine and remove the key.

•

Wait for all moving parts to stop.

Park the tractor / equipment on a flat level surface.

Place all controls in neutral, engage the park brake,
stop the engine and wait for all moving parts to
stop. Leave the operator’s position.

Place chock blocks behind and in front the auger
tire.

Place a jack under the axle frame on the side the
wheel is to be replaced. Raise the jack until the
wheel is slightly off the ground.

NOTE:

Place blocks under the frame to help
secure the auger when wheel is raised off
the ground.

Figure 46

Install the tire with the valve stem facing out (both
sides). Install the six wheel bolts (Item 1) (both
sides)

[Figure 46]

Tighten wheel nuts in a criss-cross pattern. Tighten
wheel nuts to 120 ft.-lbs. (162 N•m) of torque.

Lower the axle and tires to the ground. Remove
the strap and lifting device.

Tire Pressure

Recommended tire pressure is 45–50 PSI (310–345
kPa). Maximum tire pressure of 60 PSI (415 kPa).

CAUTION

When inflating tires, use a clip-on chuck and
extension hose long enough to allow you to stand
to one side and NOT in front of or over the tire
assembly.

Содержание 1370



















































































































































Результаты поиска

Содержание 1370

Отзывы:

Похожие инструкции для 1370

Бренды по названию

Популярные бренды

Farm King 1370, Руководство оператора и каталог запасных частей

Результаты поиска

Содержание 1370

Отзывы:

Похожие инструкции для 1370

Бренды по названию

Популярные бренды